MQ518L Rotary Press UV Varnish

Blog Image

MQ518L Rotary Press UV Varnish

DESCRIPTION.
UV varnish MQ518L is suitable for flexo varnishing. It is characterized by high adhesion to hoses, resistance to yellowing, high leveling, and strong chemical resistance. It can be coated on paper, PE, PP, PET and other materials.
FEATURES.
 

Appearance Pale yellow transparent liquid
Viscosity (cup DIN 4 mm
test at 25°C)
40-50℃
Solid content 96%±2%
Glossiness ≥90°
Abrasion resistance
(4lbs)
≥500 times
Curing conditions Light speed 2m/s or more,
UV light intensity 80w/cm²
CAUTION.
◎ Stirring fully before use, printing after 3-5 minutes of standstill, closed storage after use.
◎ UV curing immediately after varnishing.
◎ When printing particularly thick ink layer, considering that the end of printing through the UV curing machine after the heat is too high will cause sticking phenomenon. Use a laminating rack (drying rack) or lay it on its side to evaporate some of the heat before stacking;
◎ Printing squeegee adjustment slant, printing machine function to "stop before or seal the network", mesh sparse large, printing squeegee pressure to light can increase the thickness of UV light oil.  The speed of UV light solidifier and the temperature of working environment can affect the surface leveling.
◎ Note on dilution with toluene or ethyl ester.
◎ It is recommended to use solvent-resistant, alkali-resistant and alcohol-resistant ink for printing.
◎ It is recommended to add 5%-10% thinner dilution.
◎ Drying too slow, you can reduce the paper speed. If still can not dry completely, may be too low UV lamp power, it is recommended to use the radiation meter often to detect, it is recommended to replace the lamp after 800 hours.
◎ This product has a certain irritation, avoid direct contact with the skin, if contact with detergent cleaning;
◎ This product should be placed in cool, dry and ventilated conditions, avoid direct sunlight, away from heat sources.
PACKAGE
20KG in black plastic drum

 

Leave a Reply